Correct selection of dust supplies, first is to understand the type of professional workplace dust and the provisions of the state of the allowable concentration (PC - TWA) and dust-proof supplies, such as with abandon type mask specified protective factor (APF), by measuring the dust concentration of the professional workplace, as well as understand the nature of oxygen concentration and dust, etc., can choose and judge which type and what level of dust supplies.
For example:
A measured post welding soot dust concentration of 20 mg/m3, whether can wear KN95 with abandon type dust mask for protection? (as, dust mask (with abandon) specified protective factor (APF) is 10, A post oxygen concentration was 20.8%, the IDLH environment)
A protective factor for post: 20 mg/m3 present 4 mg/m3 = 5
Because of the protective factors of post A < 10, oxygen concentration is normal, it can choose KN95 levels of dust mask (with abandon type) as the dust of the position products.
1: attached the APF of all kinds of respiratory protective equipment
Attached 2: workplace dust allowable concentration in the air
<td width="154"
序 号 | 中文名 | 英文名 | 化学文摘号 （CAS No.） | PC-TWA (mg/m3) | 备注 | |
总尘 | 呼尘 | |||||
1 | 白云石粉尘 | Dolomite dust | 8 | 4 | - | |
2 | 玻璃钢粉尘 | Fiberglass reinforced plastic dust | 3 | - | - | |
3 | 茶尘 | Tea dust | 2 | - | - | |
4 | 沉淀SiO2（白炭黑） | Precipitated silica dust | 112926-00-8 | 5 | - | - |
5 | 大理石粉尘 | Marble dust | 1317-65-3 | 8 | 4 | - |
6 | 电焊烟尘 | Welding fume | 4 | - | G2B | |
7 | 二氧化钛粉尘 | Titanium dioxide dust | 13463-67-7 | 8 | - | - |
8 | 沸石粉尘 | Zeolite dust | 5 | - | - | |
9 | 酚醛树酯粉尘 | Phenolic aldehyde resin dust | 6 | - | - | |
10 | 谷物粉尘 (游离SiO2含量<10%) | Grain dust (free SiO2<10%) | 4 | - | - | |
11 | 硅灰石粉尘 | Wollastonite dust | 13983-17-0 | 5 | - | - |
12 | 硅藻土粉尘（游离SiO2含量<10%
| |||||
